BLIND RIVET
STANDARD 
The standard blind rivet is the most common rivet in our product range. Easy to use and available in several different designs and materials.
CLOSED END
The completely dense body of the rivet creates a completely gas-tight/water-tight seal for pressures up to 3500 kPa. This is achieved by using the correct tip in the tool and a borehole that is 0.1 mm larger than the diameter of the body of the blind rivet.
MULTIGRIP
The multigrip blind rivet is designed in such a way that the rivet is suitable for a wider grip area compared to a standard blind rivet.
TRI-SPLIT
The body of this blind rivet has three slits that are bent up when installed. This results in a larger contact area on the back. This makes the blind rivet perfect for use in soft materials.
PEEL
The ball on the splint has four cutting edges, which cut the body into four parts when the rivet is installed. This creates four flaps that pull and attach the materials together. Suitable for soft materials on the back and hard materials on the front (steel on wood, plastic or hard paper)
GROOVED
The serrated blind rivet has been specially developed to attach hard materials to e.g. wood or plastic where the hole does not go all the way through (blind holes) and the grip is established in the hole itself.
HAMMERDRIVE
Hammer rivets are specially designed to attach hard materials to wood (or similar materials). When the drive pin is hammered in, the rear part of the rivet divides into four sections and holds the materials together.
P-POWER
The P-Power blind rivet has been specially developed for very heavy construction applications where high extraction and shear strength is required. It is a variant of M-Power, with almost identical technical specifications.
A-POWER
The A-Power blind rivet is suitable for heavy construction applications. The high extraction and shear strength is achieved through the large bulb that is formed when the rivet is installed.
H-POWER
The H-Power blind rivet is one of the strongest rivets in our product range, with a very high extraction and shear strength.
M-POWER
The M-Power blind rivet has been specially developed for very heavy construction applications where high extraction and shear strength is required.
